当サイトではアフィリエイト広告を利用しています
湿度計
温湿度計
|
|
水銀柱がプリズムレンズにより青く見えます
● JCSS校正証明書付。 ● 再検査校正いたします。 (料金照会) ● 水銀柱がプリズムレンズにより青く見えます。 ● 二重管式(目盛板入り)です。 ● 目盛板が入っていて見誤りが少なくすることが出来ます。 ● 二重管なので目盛が消えません。 ● 経年変化の極めて少ない安定した材料で製作。 ● ISO等の取得、品質管理に必携。 ● 現場での信頼できる温度計測に最適。 製品No.温度範囲目盛全長基本検査ポイント 1-04-0-JCSS-50〜 0℃ 1/100.1℃350mm-50、-40、-30、-20、-10、0℃ 1-04-1-JCSS0〜 50℃ 1/100.1℃350mm0、10、20、30、40、50℃ 1-04-2-JCSS50〜100℃ 1/100.1℃350mm60、70、80、90、100℃ 1-04-3-JCSS100〜150℃ 1/100.1℃350mm110、120、130、140、150℃ 1-04-4-JCSS150〜200℃ 1/100.1℃350mm160、170、180、190、200℃ 1-04-5-JCSS200〜250℃ 1/100.1℃350mm210、220、230、240、250℃ 1-04-6-JCSS250〜300℃ 1/100.1℃350mm260、270、280、290、300℃ 1-04-7-JCSS300〜360℃ 1/100.1℃350mm310、320、330、340、350℃ ■ 校正証明書を添付して国家標準からトレーサブルな標準器として使用されます。 品質管理にお役立てください。 現在では「計量標準総合センターが発行する基準器検査成績書をもって計量トレーサビリティの根拠とすることはできません」と産業総合技術研究所が発表されています。 トレーサビリティ確保には弊社のJCSS校正または一般校正をご利用ください。 ■ 標準温度計(水銀使用製品)一覧表:選ぶ時の参考にしてください。 製品名特徴全長(約)径(約)1目盛幅(約)* 棒状標準温度計黄管または白管。 ガラス表面に刻み腐食目盛。 300mm6.2±0.3mm0.36mm 二重管標準温度計水銀が太く見え、目盛幅も広い二重管。 340mm5.5〜6mm0.45mm 400mm9〜9.5mm0.57mm *1目盛幅は0〜50℃の長さを計測し500(0.1℃数)で割った値です。 温度計ごとに誤差があります。 参考値としてみてください。 数値が大きい方が目盛間隔が広いので読み取りしやすいです。 ■ 標準温度計の読取り方 ・温度計の読取りは、水銀柱の先端を目盛線が水平に見えるところで読取ります。 ・二重管式は読み取りの位置が正しくない(上下する)と目盛線が水平でなく、ゆがんで見える細工になっています。 ・温度計の読取りは最大の誤差要因である視差(読取時に生じる誤差)を無くすことが大切です。 読み取り用拡大レンズを使用するのも視差をなくすのに役立ちます。 ********************************************************************** 【以下は海外向けの商品説明になります】 【Product description in English】 ********************************************************************** Ando instrument medium size (blue) double tube standard thermometer (JCSS proofreading proof memo) 1-04-5-JCSS (200-250 degrees Celsius) Mercury looks blue by a prism lens ● JCSS proofreading proof memo. ● I reexamine and proofread it. (rate inquiry) ● Mercury looks blue by a prism lens. ● It is a double tube type (entering scale board). ● A scale board enters and sees it and can reduce an error. ● As it is a double tube, a scale does not disappear. ● I produce it in extremely few stable materials of the secular variation. ● It is indispensable for the acquisition, quality control such as the ISO. ● It is most suitable for an on-site reliable temperature measurement. Product No. Temperature range Scale Full length Basic inspection point 1-04-0-JCSS -50-0 degrees Celsius 1/10 0.1 degrees Celsius 350mm -50, -40, -30, -20, -10, 0 degrees Celsius 1-04-1-JCSS 0-50 degrees Celsius 1/10 0.1 degrees Celsius 350mm 0, 10, 20, 30, 40, 50 degrees Celsius 1-04-2-JCSS 50-100 degrees Celsius 1/10 0.1 degrees Celsius 350mm 60, 70, 80, 90, 100 degrees Celsius 1-04-3-JCSS 100-150 degrees Celsius 1/10 0.1 degrees Celsius 350mm 110, 120, 130, 140, 150 degrees Celsius 1-04-4-JCSS 150-200 degrees Celsius 1/10 0.1 degrees Celsius 350mm 160, 170, 180, 190, 200 degrees Celsius 1-04-5-JCSS 200-250 degrees Celsius 1/10 0.1 degrees Celsius 350mm 210, 220, 230, 240, 250 degrees Celsius 1-04-6-JCSS 250-300 degrees Celsius 1/10 0.1 degrees Celsius 350mm 260, 270, 280, 290, 300 degrees Celsius 1-04-7-JCSS 300-360 degrees Celsius 1/10 0.1 degrees Celsius 350mm 310, 320, 330, 340, 350 degrees Celsius ■ I attach a proofreading certificate and am used as the standard which is a tracer bulldog from a national standard. Please make use for quality control. Industry synthesis institute of technology is announced now saying "I cannot do it with grounds of the measurement traceability for the examination with standard container results handwriting which measurement standard synthesis center publishes". Please use our JCSS proofreading or general proofreading for securing of traceability. ■ A standard thermometer (mercurial use product) table: When choose you; please refer to it. Product name Characteristic Full length (about) Diameter (about) 1 scale width (about) * Stick standard thermometer A yellow pipe or a white pipe. It is a chopping fine corrosion scale on the glass surface. 300mm 6.2±0.3mm 0.36mm Double tube standard thermometer The double tube that mercury looks big, and the scale width is wide. 340mm 5.5-6mm 0.45mm 400mm 9-9.5mm 0.57mm *It is the price that 1 scale width measures length of 0-50 degrees Celsius and divided by 500 (the number of 0.1 degrees Celsius). There is an error in every thermometer. Please see it for a reference price. As scale space is large, I read it and am easy to do the one that a number has a big. ■ Reading of the standard thermometer ・The reading of the thermometer reads the tip of the mercury in a place to see a scale line horizontally. ・As for the double tube type, a scale line is not level with (go up and down) that a position is not right of the reading, and is warped, and is seen; is worked. ・It is important that the reading of the thermometer gets rid of parallax (error to occur at the time of reading) that is the biggest error factor. It is helpful to use a magnifier for the reading to get rid of parallax.
商品を詳しく見る
¥ 117,650-(税込)
#ショップ名 :
生活計量(ライフスケール)
#送料 :
送料別
#クレジットカード :
利用可
#海外配送 :
海外配送可能
#海外配送対象地域 :
ワールドワイド
#あす楽 :
翌日配送不可
#ギフト :
ギフト包装可能
商品を詳しく見る
「温度計」の関連商品を見る
「温度計」の人気商品を見る
| | |
|